Lanyards and energy absorbers
The link between the user and a structure
Lanyards must allow a worker to move about with maximum security and
without getting in the way.
There are two types of lanyards:
- lanyards for restraint and for work positioning:
- to prevent the worker from moving around in a zone where there is risk of falling
- to position the worker in the work area (when there is risk of falling, a fall arrest system must be used) - energy absorbers: to limit the impact transferred to the user during a fall
Photo (c) Kalice / Téléphérique La Grave
Adjustable lanyards for work positioning
Lanyard with energy absorber
Progression lanyard
VIDEOS * ASAP
ASAP - Mobile fall arrester
Introducing the ASAP, for use on a safety rope. Made for difficult access and confined spaces, pylons, energy and networks, framing and roofing...
****
Using the ASAP on an inclined surface
The ASAP works on vertical or angled rope. In case of a fall or a slide, the ASAP will immediatly lock itself onto the rope to stop the fall, even if the user intervenes, for example by grabbing it.
****
ASAP - Fall simulation EN353-2 standard
Even after a fall of a 100kg (~220 lb) mass, the ASAP don't damage the rope.
