Safety Alert
© 2024 Petzl Distribution - LAFOUCHE
Tensioning a tyrolean with MAESTRO, I’D, RIG
Tyrolean on rope with RIG
Installing a life-line
Rigging a retrievable rope with the RESCUCENDER
Installing Ropes
Accompanied descent rescue with the RIG
Team rescue techniques for hauling and lowering
Comparison between MAESTRO and I’D for a rescue using twin tensioned haul lines
Accompanied descent rescue
Haul system with the RIG
Release and rescue of a victim on a fall arrest system, by two co-workers
Rope rescue: ASAP and accompanied descent
Rope rescue: security of the ASAP's hold on the rope
Rope rescue: ASAP performance on a taut rope
Rescuing a person hanging on an ABSORBICA lanyard
Hauling: combined lowering/raising system
Hauling: independent lowering/raising systems
Release and rescue of a co-worker using a rescue kit
Release and rescue of a co-worker suspended on a static support.
Release and rescue of a co-worker suspended on a long rope
Performance of the ASAP with a 250 kg load, with the ASAP fixed to an anchor.
Releasable anchor with the RIG: lowering system pre-installed on the ground.
Securing the MAESTRO with an ASAP for training.
Descending With Additional Braking
Short down-climb on ascenders
Backup belay for one person with the ASAP on the anchor
Using a single rope clamp?
MAESTRO line: difference between S and L models
MAESTRO features
Remote control of the MAESTRO handle with a cord
Belaying with the MAESTRO
Using the GRILLON as an anchor for more than one person
Making the ASAP drop-resistant
ASAP usage on static rope
Using pulleys with small-diameter rope or cord.
Using PPE for material handling
Lowering 150 kg - 250 kg with the I’D S and I’D EVAC on the anchor
Lowering 150 kg - 280 kg with the I’D L on the anchor
Belaying loads with the I’D S, I’D L, and I’D EVAC
How to calculate mechanical advantage
Primary uses of the RIG
Primary belay device in a fall arrest system
Backup device in a rope access system
Choice of harness attachment point for the ASAP
I’D EVAC main uses
ASAP usage in high winds
Performance of new ropes
How to properly adjust your AVAO BOD harness?
How to properly adjust your AVAO SIT harness?
Video - Installing the WIRE STROP
I’D S uses and specifications
I’D L uses and specifications
Using the ADJUST rope adjuster with the MGO OPEN
General principles for work at height
Understanding and optimizing clearance with ABSORBICA-I and Y
Clearance values with ABSORBICA-I and Y depending on your situation
Connecting the MGO to a structure
Pulley system efficiency tests with MAESTRO, I’D S, PRO TRAXION, ROLLCLIP...
Fall arrest on a vertical lifeline with ASAP LOCK and ASAP
Greater efficiency on rope ascents with FALCON ASCENT and TOP CROLL S
ASAP usage on an incline
How and why use a fall-arrest lanyard?
ABSORBICA-Y lanyards and fall-arrest lanyard connector parking on the harness
Oblique or vertical anchors and fall distance with ABSORBICA lanyards.
Tests of ABSORBICA lanyards in a fall over an edge
ASAP usage when approaching an obstacle or the ground
Making a Y-lanyard with a knotted JANE or PROGRESS ADJUST-I lanyard
Work positioning, hands-free position
Working with sharp objects or molten metal splash
Washing a new low stretch rope before use
Carabiner locking systems
Different carabiner shapes
Carabiner compatibility test
Carabiner basics
Choice of carabiner for attaching a descender with a safety gate (I’D S, RIG, STOP...) to the harness
Choice of lanyard end carabiner for a work positioning lanyard
Choice of lanyard-end carabiner for a fall-arrest lanyard
Choice of carabiner for connecting the fall-arrest lanyard to the harness
Choice of carabiners for attaching the rope to the anchor
Choice of carabiners for hauling systems and pulley attachment
Choice of carabiner for connecting a ZILLON or GRILLON lanyard to the harnesss
Choice of carabiners for attaching a HUIT, RACK... to the harness
Examples of dangerous carabiner loading.
Attaching a rope to the harness
Long or short rope ascent
Passing a re-belay on ascent
Occasional rope climbing with the I'D
